4-(4,6-Dimethoxy[1.3.5]triazin-2-yl)-4-methylmorpholinium chloride
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
CATALOG No.：40169
MSDS Name：4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride, 99%
Synonyms：DMTMM, DMT-MM
Company Identification: Shanghai Medpep Co., Ltd.
For information, Call: +86 21 65566949
SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS
MSDS Name: 4-(4,6-Dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride
Purity: 99% min.
CAS No：3945-69-5
Molecular Formula: C10H17ClN4O3
Molecular Weight: 276.72
SECTION 3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW：
Danger! Causes eye and skin burns. Causes digestive and respiratory tract burns. May be harmful if swallowed, inhaled, or absorbed through the skin. Light sensitive. Hygroscopic (absorbs moisture from the air).
TARGET ORGANS: Eyes, skin, mucous membranes.
POTENTIAL HEALTH EFFECTS：
EYE:
Causes eye burns.
SKIN:
Causes skin burns.
INGESTION:
Causes gastrointestinal tract burns.
INHALATION:
Causes chemical burns to the respiratory tract.
CHRONIC: Possible risk of irreversible effects.
SECTION 4. FIRST-AID MEASURES
EYES:
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid imme diately.
SKIN：
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
INGESTION:：
Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
INHALATION：
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
NOTES FOR PHYSICIAN
Treat symptomatically and supportively.
SECTION 5. FIRE FIGHTING MEASURES
Flammability:：No data.
FLASH POINT：Not available.
AUTOIGNITION TEMPERATURE: Not available.
EXTINGUISHING MEDIA：Use foam, dry chemical, or carbon dioxide.
GENERAL INFORMATION：As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
SECTION 6. ACCIDENTAL RELEASE MEASURES
GENERAL INFORMATION: Use proper personal protective equipment as indicated in Section 8.
SPILLS AND LEAKS: Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions. Provide ventilation.
ENVIRONMENTAL PRECAUTIONS: NO DATA.
SECTION 7. HANDLING AND STORAGE
HANDLING：
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only with adequate ventilation.
STORAGE：
Store in a tightly closed container. Deep freeze (below -20°C)..
HYGIENE PRACTICES：
No data.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS：
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
EYES：Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
SKIN AND CLOTHING:Wear appropriate protective gloves to prevent skin exposure. Wear appropriate protective clothing to prevent skin exposure.
RESPIRATORS：Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
OTHER PROTECTIVE：
FACILITIES STORING OR UTILIZING THIS MATERIAL SHOULD BE EQUIPPED WITH AN EYEWASH FACILITY AND A SAFETY SHOWER.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE： White powder.
ODOR: Not available.
pH：Not available。
VAPOR PRESSURE：Not available。
VAPOR DENSITY：Not available。
EVAPORATION RATE：Not available。
DYNAMIC VISCOSITY：Not available。
BOILING POINT：Not available.
FREEZING / MELTING POINT：118 - 120°C
DDECOMPOSITION TEMPERATURE VISCOSITY：Not available。
SOLUBILITY IN WATER： Not available.
SPECIFIC GRAVITY / DENSITY： NOT AVAILABLE.
SECTION 10. STABILITY AND REACTIVITY
CHEMICAL STABILITY: Not available.
CONDITIONS TO AVOID： Light, excess heat, exposure to moist air or water.
INCOMPATIBILITY WITH OTHER MATERIALS：Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS： Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide.
HAZARDOUS POLYMERIZATION: Has not been reported
SECTION 11. TOXICOLOGICAL INFORMATION
RTECS #:
EYE EFFECT：
SKIN EFFECT：
INGESTION EFFECT：
INHALATION EFFECT：
OTHER TOXICOLOGICAL INFORMATION:
SECTION 12. ECOLOGICAL INFORMATION
ECOTOXICITY: NO INFORMATION PROVIDED.
BIOACCUMULATION: NO INFORMATION PROVIDED.
BIODEGREDATION: NO INFORMATION PROVIDED.
ENVIRONMENTAL STABILITY: NO INFORMATION PROVIDED.
SECTION 13. DISPOSAL CONSIDERATIONS
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
SECTION 14. TRANSPORT INFORMATION
DOT PROPER SHIPPING NAME: DOT regulated - small quantity provisions apply (see 49CFR173.4)(USA); OR Corrosive Solid, N.O.S. (Canada)
DOT HAZARD CLASS: 8
DOT IDENTIFICATION NO: UN1759
DOT PACKING GROUP:III
DOT LABEL TYPE:
SECTION 15. REGULATORY INFORMATION
Chinese Governmental regulations。
SECTION 16. OTHER INFORMATION
LAST UPDATED：July 12, 2007
THE INFORMATION ABOVE IS BELIEVED TO BE ACCURATE AND REPRESENTS THE BEST INFORMATION CURRENTLY AVAILABLE TO US. HOWEVER, WE MAKE NO WARRANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO SUCH INFORMATION, AND WE ASSUME NO LIABILITY RESULTING FROM ITS USE. USERS SHOULD MAKE THEIR OWN INVESTIGATIONS TO DETERMINE THE SUITABILITY OF THE INFORMATION FOR THEIR PARTICULAR PURPOSES. IN NO EVENT SHALL CII BE LIABLE FOR ANY CLAIMS, LOSSES, OR DAMAGES OF ANY THIRD PARTY OR FOR LOST PROFITS OR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, HOWSOEVER ARISING, EVEN IF CII HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
|
