MSDS of PyAOP

PyAOP

SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
CATALOG No.：40148
MSDS Name：PyAOP
Synonyms：(7-Azabenzotriazol-1-yloxy)tripyrrolidinophosphonium hexafluorophosphate
Company Identification: Shanghai Medpep Co., Ltd.
For information, Call: +86 21 65566949

SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazard Component: PyAOP
Purity: 99% min.
CAS No：156311-83-0
Molecular Formula: C₁₇H₂₇F₆N₇OP₂
Molecular Weight: 521.38

SECTION 3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW：
- Risk of serious damage to eyes
- May cause sensitization by inhalation and skin contact
TARGET ORGANS: Not available.
POTENTIAL HEALTH EFFECTS：
EYES:
- Rinse immediately with plenty of water for 15 minutes
- Do not apply neutralizing agents
- Consult a doctor/medical service if irritation persists
SKIN：
- Rinse with water
- Consult a doctor/medical service if irritation persists
INGESTION：
- Never give water to an unconscious person
- Consult a doctor/medical service if you feel unwell
INHALATION：
- Remove the victim into fresh air
- Unconscious: maintain adequate airway and respiration
- Consult a doctor/medical service if breathing problems develop
CHRONIC:
- May cause sensitization by skin contact - May cause sensitization by inhalation
- Mutagenicity: AMES test negative
ON CONTINUOUS/REPEATED EXPOSURE/CONTACT:
- Skin rash/inflammation
- Respiratory difficulties

SECTION 4. FIRST-AID MEASURES
EYES:
- Rinse immediately with plenty of water for 15 minutes
- Do not apply neutralizing agents
- Consult a doctor/medical service if irritation persists
SKIN：
- Rinse with water
- Consult a doctor/medical service if irritation persists
INGESTION:：
- Never give water to an unconscious person
- Consult a doctor/medical service if you feel unwell
INHALATION：
- Remove the victim into fresh air
- Unconscious: maintain adequate airway and respiration
- Consult a doctor/medical service if breathing problems develop
NOTES FOR PHYSICIAN
Not available.

SECTION 5. FIRE FIGHTING MEASURES
FLAMMABILITY: Not easily combustible.
FLASH POINT：Not available.
AUTOIGNITION TEMPERATURE: Not available.
EXPLOSION LIMITS, LOWER: Not available.
EXPLOSION LIMITS, UPPER: Not available.
EXTINGUISHING MEDIA：
- Water spray
- Polyvalent foam
- ABC powder
- Carbon dioxide
- Solid water jet ineffective as extinguishing medium
GENERAL INFORMATION：AS IN ANY FIRE, WEAR A SELF-CONTAINED BREATHING APPARATUS IN PRESSURE-DEMAND, MSHA/NIOSH (APPROVED OR EQUIVALENT), AND FULL PROTECTIVE GEAR.
- It's dust is explosive with air
- On burning: release of toxic and corrosive gases/vapours
(phosphorus oxides, nitrous vapours, hydrofluoric acid, carbon monoxide,
carbon dioxide)

SECTION 6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS:
Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
SPILLS AND LEAKS:
- Contain leaking substance, pump over in suitable containers
- Plug the leak, cut off the supply
- Knock down/dilute dust cloud with water spray.
ENVIRONMENTAL PRECAUTIONS: No data.

SECTION 7. HANDLING AND STORAGE
HANDLING：
- Observe very strict hygiene - avoid contact
- Avoid raising dust
- Remove contaminated clothing immediately
- Clean contaminated clothing
STORAGE：
- Keep container tightly closed.
- Store in a dry area.
- Meet the legal requirements.
- Keep away from: heat sources, ignition sources
HYGIENE PRACTICES：
No data.

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS：
Work under local exhaust/ventilation
EYES：
- Face shield
- In case of dust production: protective goggles
SKIN AND CLOTHING:
- Gloves
- Protective clothing
- In case of dust production: head/neck protection.
RESPIRATORS：
- High dust production: compressed air/oxygen apparatus
- Dust formation: dust mask
OTHER PROTECTIVE：
No data.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE:: White to off-white powder.
ODOR: Not available.
pH: Not available.
VAPOR PRESSURE: Not available.
VISCOSITY: Not available.
BOILING POINT: Not available.
Freezing/Melting Point: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Soluble in: Dimethylformanide
Specific Gravity/Density: Not available.

SECTION 10. STABILITY AND REACTIVITY
CHEMICAL STABILITY: Stable under normal temperatures and pressures.
CONDITIONS TO AVOID： Keep away from: heat sources, ignition sources.
INCOMPATIBILITY WITH OTHER MATERIALS：Not available.
HAZARDOUS DECOMPOSITION PRODUCTS： On burning: release of toxic and corrosive gases/vapours (phosphorus oxides, nitrous vapours, hydrofluoric acid, carbon monoxide, carbon dioxide).
HAZARDOUS POLYMERIZATION: Not available.

SECTION 11. TOXICOLOGICAL INFORMATION
RTECS #:
EYE EFFECT：Hazardous in case of eye contact (irritant).
SKIN EFFECT：Hazardous in case of skin contact (irritant). Skin inflammation is characterized by itching, scaling, reddening, or, occasionally, blistering.
INGESTION EFFECT：Hazardous in case of ingestion.
INHALATION EFFECT：Slightly hazardous in case of inhalation (lung irritant).
OTHER TOXICOLOGICAL INFORMATION: Not available.

SECTION 12. ECOLOGICAL INFORMATION
ECOTOXICITY: Not available.
BIOACCUMULATION: Not available.
BIODEGREDATION: Not available.
ENVIRONMENTAL STABILITY: Not available.

SECTION 13. DISPOSAL CONSIDERATIONS
Waste must be disposed of in accordance with federal, state and local environmental control regulations.

SECTION 14. TRANSPORT INFORMATION
Not available.

SECTION 15. REGULATORY INFORMATION
Chinese Governmental regulations。

SECTION 16. OTHER INFORMATION
LAST UPDATED：2006,4,28
THE INFORMATION ABOVE IS BELIEVED TO BE ACCURATE AND REPRESENTS THE BEST INFORMATION CURRENTLY AVAILABLE TO US. HOWEVER, WE MAKE NO WARRANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO SUCH INFORMATION, AND WE ASSUME NO LIABILITY RESULTING FROM ITS USE. USERS SHOULD MAKE THEIR OWN INVESTIGATIONS TO DETERMINE THE SUITABILITY OF THE INFORMATION FOR THEIR PARTICULAR PURPOSES. IN NO EVENT SHALL CII BE LIABLE FOR ANY CLAIMS, LOSSES, OR DAMAGES OF ANY THIRD PARTY OR FOR LOST PROFITS OR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, HOWSOEVER ARISING, EVEN IF CII HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.