8-Quinolinesulfonyl chloride

SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
CATALOG No.:40172
MSDS Name:8-Quinolinesulfonyl chloride
Synonyms:None
Company Identification: Shanghai Medpep Co., Ltd.
For information, Call: +86 21 65566949

SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazard Component: 8-Quinolinesulfonyl chloride
Purity: 98% min.
CAS No:18704-37-5
Molecular Formula: C9H6ClNO2S
Molecular Weight: 227.67

SECTION 3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Moisture sensitive.

TARGET ORGANS: Respiratory system, eyes, skin.
POTENTIAL HEALTH EFFECTS
EYES:
Causes eye burns.

SKIN
Causes skin burns.

INGESTION
Causes gastrointestinal tract burns.

INHALATION
Causes chemical burns to the respiratory tract.

CHRONIC:
Not available.

SECTION 4. FIRST-AID MEASURES
EYES:
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid imme diately.
SKIN
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
INGESTION:
Do not induce vomiting. Get medical aid immediately.
INHALATION
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
NOTES FOR PHYSICIAN
Treat symptomatically and supportively.

SECTION 5. FIRE FIGHTING MEASURES
FLAMMABILITY: Not available.
FLASH POINT:Not available.

AUTOIGNITION TEMPERATURE: Not available.
EXPLOSION LIMITS, LOWER: Not available.
EXPLOSION LIMITS, UPPER: Not available.
EXTINGUISHING MEDIA

Use foam, dry chemical, or carbon dioxide.
GENERAL INFORMATION:As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated. Non-combustible, substance itself does not burn but may decompose upon heating to produce irritating, corrosive and/or toxic fumes. Runoff from fire control or dilution water may cause pollution.

SECTION 6. ACCIDENTAL RELEASE MEASURES
General Information:

Use proper personal protective equipment as indicated in Section 8.
SPILLS AND LEAKS:

Vacuum or sweep up material and place into a suitable disposal container.
ENVIRONMENTAL PRECAUTIONS: No data.

SECTION 7. HANDLING AND STORAGE
HANDLING
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood.
STORAGE
Store in a cool, dry place. Store in a tightly closed container. Corrosives area. Store under an inert atmosphere.
HYGIENE PRACTICES
No data.

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
EYES:

Not available.
SKIN AND CLOTHING:

Wear appropriate protective gloves to prevent skin exposure. Wear appropriate protective clothing to prevent skin exposure
RESPIRATORS:

Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
OTHER PROTECTIVE
No data.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE::off-white powder.
ODOR: Not available.
pH: Not available.
VAPOR PRESSURE: Not available.
VISCOSITY: Not available.
BOILING POINT: Not available.
Freezing/Melting Point: Not available.
Decomposition Temperature: 126.5 - 130°C
Solubility in water:Not available.

Specific Gravity/Density: Not available.

SECTION 10. STABILITY AND REACTIVITY
CHEMICAL STABILITY: Not available.

CONDITIONS TO AVOID:Incompatible materials, exposure to moist air or water.
INCOMPATIBILITY WITH OTHER MATERIALS:Oxidizing agents, bases.
HAZARDOUS DECOMPOSITION PRODUCTS:Hydrogen chloride, chlorine, nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide.

HAZARDOUS POLYMERIZATION: Has not been reported.

SECTION 11. TOXICOLOGICAL INFORMATION
RTECS #:
EYE EFFECT:No information found.
SKIN EFFECT:No information found.
INGESTION EFFECT:No information found.
INHALATION EFFECT:No information found.

OTHER TOXICOLOGICAL INFORMATION: No information found.

SECTION 12. ECOLOGICAL INFORMATION
ECOTOXICITY: Not available.
BIOACCUMULATION: Not available.
BIODEGREDATION: Not available.
ENVIRONMENTAL STABILITY: Not available.

SECTION 13. DISPOSAL CONSIDERATIONS
Waste must be disposed of in accordance with federal, state and local environmental control regulations.

SECTION 14. TRANSPORT INFORMATION
Shipping Name:No information available.
Hazard Class: No information available.
UN Number: No information available.
Packing Group: No information available.

SECTION 15. REGULATORY INFORMATION
Chinese Governmental regulations。

SECTION 16. OTHER INFORMATION
LAST UPDATED:2007,10,10
THE INFORMATION ABOVE IS BELIEVED TO BE ACCURATE AND REPRESENTS THE BEST INFORMATION CURRENTLY AVAILABLE TO US. HOWEVER, WE MAKE NO WARRANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO SUCH INFORMATION, AND WE ASSUME NO LIABILITY RESULTING FROM ITS USE. USERS SHOULD MAKE THEIR OWN INVESTIGATIONS TO DETERMINE THE SUITABILITY OF THE INFORMATION FOR THEIR PARTICULAR PURPOSES. IN NO EVENT SHALL CII BE LIABLE FOR ANY CLAIMS, LOSSES, OR DAMAGES OF ANY THIRD PARTY OR FOR LOST PROFITS OR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, HOWSOEVER ARISING, EVEN IF CII HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.


 
Shanghai Medpep Co., Ltd.All rights reserved. Copyright 2007.